- Intermediate reflex wing
The adventure starts here
The Falcon 2 is a well-rounded reflex paramotor wing for intermediate pilots. The wing lets you fly dynamically and build your skills in a safe and fun way. The Falcon's mix of qualities make it a great wing to explore the different aspects of advanced paramotor flight, from fun flying, cross-country, bivouac to competition.
|Flat area (m2)||20.36||22.27||24.16||26.03|
|Flat span (m)||10.6||11.09||11.55||11.99|
|Flat aspect ratio||5.5||5.5||5.5||5.5|
|Projected area (m2)||17.60||19.25||20.88||22.5|
|Projected span (m)||8.63||9.03||9.4||9.76|
|Projected aspect ratio||4.2||4.2||4.2||4.2|
|Number of cells||56||56||56||56|
|Glider weight (kg)||5||5.3||5.6||6.1|
|Certified weight range (paramotor) (kg)||75-120||85-130||95-140||105-155|
|Certification (paramotor) (kg)||DGAC||DGAC||DGAC||DGAC|
Fast and fuel-efficient
The Falcon 2 has a wide speed range, and transitions easily from flat, efficient turns in thermals to relaxed, high-speed cruising. The wing also achieves excellent fuel-efficiency thanks to the aerodynamic efficiency of the airfoil and its ability to hold steady at low RPM.
Well-coordinated and fun
Handling was a key consideration in the design and development of the Falcon 2. The new 2D steering system offers extra control, you can vary the turn by either pulling down the centre of the glider or only the wing tip. Whether you’re drifting leisurely across the landscape or eating up the miles in a distance competition, it’s a wing we believe will serve you well for a long time as you progress in paramotoring.
Updated riser for better ergonomics
The new Falcon 2 riser features a trim handle, which can be magnetically stowed both above and below the trim buckle. The trimmer is marked in 25% increments and there’s a light stopper. The brake webbing is elasticated and features a Harken pulley for extra smooth operation.
- reflex airfoil
- advanced speed system
- 2D-steering system
- highest quality materials used throughout ensure maximum durability
Upper surface leading edge: Myungjin Textile 40 g/m²
Upper surface: Myungjin Textile 32 g/m²
Lower surface: Porcher skytex 27 g/m²
Upper: Edelrid 8001-050 | 070 | 090 | 130
Middle: Edelrid 8001-050 | 070 | 090 | 130 | 190
Main: Edelrid 8001-090 | 130 | 190 | 230 | 280 | 340
Brake: GIN TGL 180